High Solids & Low Viscosity Adhesive
1026 Solvent-Free Laminating Adhesive
Solvent-free two-component polyurethane adhesive for laminators running without a solvent recovery system.
- Product code1026
- FamilyHigh Solids & Low Viscosity Adhesive
- ChemistryPolyurethane
- ManufacturerZhongshan Baiton Coating Co., Ltd.
- Data sheetIssued per grade, on request
- SampleLine-trial size, on request
No price on this page. The grade is quoted against structure, fill and volume — a number without those details would be a guess.
In short: Solvent-free two-component polyurethane adhesive for laminators running without a solvent recovery system. It is supplied by Zhongshan Baiton Coating Co., Ltd. in Zhongshan, Guangdong, China, with a technical data sheet covering solids, viscosity, mix ratio, pot life and cure schedule, plus a certificate of analysis for the batch shipped.
1026 is a solvent-free two-component polyurethane adhesive. There is no drying tunnel and no solvent to recover: the adhesive is applied warm and the two webs are combined at the nip, so the whole system depends on accurate metering and temperature control.
Typical use
Solventless lamination of film combinations where the line is set up for it — PET//PE, BOPP//PE and similar structures for food and non-food flexible packaging.
What the line has to control
- Mix ratio. Off-ratio adhesive cures slowly or not at all; the error shows up days later as delamination.
- Temperature. Viscosity and coat weight both follow it.
- Line speed. Too fast and the adhesive has no time to wet out before the nip.
- Cure room. Solvent-free systems need time and temperature to reach final bond.
Before the trial
Send the structure, the laminator make and the target line speed. The grade is supplied with a data sheet covering mix ratio, application temperature and cure schedule, and the sample is sized for a line trial rather than a lab draw-down.
Questions about 1026
Which structure is this grade used on?
Grade selection is made against the structure and the fill. Send the film combination and the process conditions and the correct grade is confirmed in writing before the sample ships.
Is a data sheet available?
Yes — solids, viscosity, mix ratio, pot life and cure schedule are issued on the technical data sheet for this code, together with the certificate of analysis for the batch supplied.
Can this grade be trialled before a full order?
Yes. The sample is sized for a trial on the production line, and the trial should be checked for bond strength after the full cure rather than immediately.
Need 1026 quoted against a structure?
Send the film combination and the fill — the data sheet follows the same reply.